Jeff
are you sure the seal strip was styrene? The glider boys over here use
Melinex which is polyethylkene teraphthalate. Dacron to you and Terylene
to us but in film form. They make pop bottles from it too.
Keep us informed about your performance gains please/
Graham
Rman wrote:
What I used was a 2.25" wide piece of .020" styrene, a
> product that I use, almost daily in my sign/graphics business. I
> attached it to the wing using 1" hem tape (a very strong, two sided
> tape, used to hem banners). Once the engine was restored to normal
> operating condition, the results were immediate and astounding.
> Thanks again, John for your suggestion...
>
> Jeff - Baby Blue
> 284 hours
>
|