Hi Ralph.
I had the same problem - 914/Expbus. Made contact with Nigel Charles - who
very kindly constructed my system.
It's based on the Expbus wiring diagram and built up to my specifications.
Nigel has since laid it out in the Europa Flyer (issue 45, June 2005).
If you don't have this magazine, I'm sure Nigel will send you a copy of the
diagram.
Hope this helps
Hans
----- Original Message -----
From: "Ralph K. Hallett III" <n100rh@sbcglobal.net>
Sent: Wednesday, May 23, 2007 4:36 PM
Subject: Europa-List: wiring up regulator, help!
> <n100rh@sbcglobal.net>
>
> Uncle!
> I must be a total retard, I am so confused by the wiring of my 914...
> help!
> As back ground information, I have a Control Vision Corp. EXP BUS 2 with
> two batteries.
> The current (sic) problem is not understanding how to wire up the
> regulator at points R, B+, C. And, what to do with the capacitor. What
> size wire, wires? come out of R and B+.
> Can anyone direct me to another reference other than the Rotax manual
> Thanks, anyone know a good counselor ?
>
> Ralph
>
>
>
|