Hans and all,
Thanks very much for the help, I seem to be over my mental block and
moving forward again. This has always been such a great group people.
Thanks,
Ralph
Hans J. Danielsen wrote:
>
> Hi Ralph.
>
> I had the same problem - 914/Expbus. Made contact with Nigel Charles -
> who very kindly constructed my system.
>
> It's based on the Expbus wiring diagram and built up to my
> specifications. Nigel has since laid it out in the Europa Flyer (issue
> 45, June 2005).
>
> If you don't have this magazine, I'm sure Nigel will send you a copy
> of the diagram.
>
> Hope this helps
>
> Hans
>
>
> ----- Original Message ----- From: "Ralph K. Hallett III"
> <n100rh@sbcglobal.net>
> To: <europa-list@matronics.com>
> Sent: Wednesday, May 23, 2007 4:36 PM
> Subject: Europa-List: wiring up regulator, help!
>
>
>> <n100rh@sbcglobal.net>
>>
>> Uncle!
>> I must be a total retard, I am so confused by the wiring of my 914...
>> help!
>> As back ground information, I have a Control Vision Corp. EXP BUS 2
>> with two batteries.
>> The current (sic) problem is not understanding how to wire up the
>> regulator at points R, B+, C. And, what to do with the capacitor.
>> What size wire, wires? come out of R and B+.
>> Can anyone direct me to another reference other than the Rotax manual
>> Thanks, anyone know a good counselor ?
>>
>> Ralph
>>
>>
>>
>>
>>
>
>
|