<<photocopied onto ordinary paper. It has set solidly in legible state
> without any blurring of the lettering >>
I suspect that the Inspector's signature (when applied) will get 'bleached'
by the wet epoxy, unless signed with a laundry pen!
Duncan McF.
----- Original Message -----
From: "David Joyce" <davidjoyce@doctors.org.uk>
Sent: Sunday, July 15, 2007 11:22 PM
Subject: Europa-List: Mod 73
> <davidjoyce@doctors.org.uk>
>
> Just to add to what David Corbett has said about the practicalities: I
> brought my tail planes back to my workshop and used a piece of plumbing
> waste pipe, and a vacuum cleaner extension pipe which both needed building
> up to a tight fit using PVC tape on one side and duct tape covered with
> smooth parcel tape on the other side, both covered liberally with grease,
> but without cling film or any extra release agent. The mod part 1 took
> about
> 90 mins and seemed straightforward with the hole dimensions OK and both
> TP6s
> solidly bonded. The pipes came out with the sort of twisting force you can
> readily apply by hand.
> For those who don't want to wait for self adhesive labels, I
> experimented with putting a single layer of bid over the required placard,
> simply photocopied onto ordinary paper. It has set solidly in legible
> state
> without any blurring of the lettering Regards, David Joyce, G-XSDJ
>
>
>
|