Jos-
If you want to use the AOA indicator, they say that you must use the Dynon
pitot.
It has a second hole in it at about a 60 degree angle from the pitot and the
Dynon computer looks at the difference between the two inputs. I have installed
both that and the Europa pitot and will use the Europa pitot to drive a
steam gauge backup ASI and the Dynon pitot to drive the Dynon. I will share the
static source from the Europa tube.
-------------- Original message --------------
From: "josok" <josok-e@ukolo.fi>
>
> Hi Jim,
>
> Can't see that this has to be absolutely without tolerance exactly parallel.
The
> dynon aoa indicator will be learning the exact difference between the pitot
> and
> stall tube later during a series of test stalls. In will try to use the
> standard
> europa pitot and the stall warner tube as inputs. Don't know if that works,
> but
> will find it out in a week or so. I have the dynon asi/stall pitot, but would
> prefer not to pull more tubes through the plane.
>
> Kind Regards,
>
> Jos Okhuijsen
>
>
>
>
>
>
> Visit - www.EuropaOwners.org
>
>
>
>
>
>
>
>
<html><body>
<DIV>Jos-</DIV>
<DIV> </DIV>
<DIV>If you want to use the AOA indicator, they say that you must use the Dynon
pitot. It has a second hole in it at about a 60 degree angle from the
pitot
and the Dynon computer looks at the difference between the two inputs.
I have installed both that and the Europa pitot and will use the Europa pitot
to drive a steam gauge backup ASI and the Dynon pitot to drive the Dynon.
I will share the static source from the Europa tube. </DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff
2px solid">-------------- Original message -------------- <BR>From: "josok"
<josok-e@ukolo.fi> <BR><BR>> --> Europa-List message posted by:
"josok" <JOSOK-E@UKOLO.FI><BR>> <BR>> Hi Jim, <BR>> <BR>> Can't see
that this has to be absolutely without tolerance exactly parallel. The <BR>>
dynon aoa indicator will be learning the exact difference between the pitot and
<BR>> stall tube later during a series of test stalls. In will try to use
the standard <BR>> europa pitot and the stall warner tube as inputs. Don't
know if that works, but <BR>> will find it out in a week or so. I have the
dynon asi/stall pitot, but would <BR>> prefer not to pull more tubes through
the plane. <BR>> <BR>> Kind Regards, <BR>> <BR>> Jos Okhuijsen
<BR>> <BR>> <BR>> <BR>> <BR>> <BR>> <BR>> Visit -
www.EuropaOwners.org <BR>> <BR>> <BR>> <BR>> <BR>&
gt; <B
<pre><b><font size=2 color="#000000" face="courier new,courier">
</b></font></pre></body></html>
|