> i have seen a few of you talking about your ailerons sagging a bit at
> the tips, and using a third hinge, so i was thinking about moving the
> centre hinge inboard about 200mm and fitting the third hinge during
> the build.
Craig,
FWIW, I'd read about guys adding a 3rd hinge, and I'd had some concerns
about the distance between the two hinges being long so I added a 5.5"
hinge midway between the 2 as per plans. When it came to mounting the
ailerons, I found that my tips sagged about 1/8" and ultimately added a
2.5" hinge at the tip.
good luck,
Fred
A194
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
|