Hi Ferg,
Rotax manual says 3amps per pump. Others I've heard from say 2.5.
I used #18 wire and grounded them locally at a ground bus near the rear
mounted battery.
Kevin
Fergus Kyle wrote:
>
> Happy Christmas and New Year greetings...
> Perhaps it's my advancing lack of thoroughness, but can't find the
> magic electrical current values for the Rotax 914 pumps. Somewhere in the
> dim past I calculated 15 feet of feed needs #18 wire because I measured 1.2A
> when testing the output before installation. However it occurs to me that
> perhaps the pumps demand more when under load and I haven't allowed for
> that.
> What's the consensus - or - where do I find the figures?
> Cheers
> Ferg
>
>
>
|