Jeff,
Check my build web site (URL in signature block). Go to album Year
#3, Q1 2004. Down toward the bottom is a pic taken down the tunnel,
looking aft, of the rudder cables, pulleys and the safety blocks. You
can see the rudder cables coming out of the nylon, Nyloflow tubing.
If this isn't what you want, let me know and I'll try to find a pic
with the information you need.
Good building and great flying,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
http://www.europaowners.org/N914XL
(95% done, only 95% to go) tail kit done, wings closed, cockpit module
installed, pitch system in, landing gear complete, rudder system in
with Singleton Mod, outrigger mod in, Fuselage Top on, lift/drag/flap
pins in, wing incidence set, tie bar in, flap drive in, baggage bay
in. Fuel system complete. Rotax and Airmaster installed. Mods 62,
66, 70 & 72 done. Completed the instrument panel install. Europa
interior kit being installed. Installed windows. Working in - 25
Electrical, 28 Flaps, 30 Fuel System, 32 Tail, 34 Door Latches & 35
Doors, 37 Finishing. Mostly finishing these days.
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
On Jun 21, 2008, at 6:24, Jeffrey J Paris wrote:
> >
>
>
> Dear Thread,
>
> A quick question? I am in the process of running my rudder cables.
> I am at the part of the instructions in which we fabricated the 20mm
> x 30mm Tufnil blocks that are to be located on the plywood triangle
> seat support ribs. When we place ours on the rib the cable ends up
> rubbing on the inside walls of the console. If we make new and
> deeper blocks I'm concerned with clearance of the landing gear
> (monowheel). Does anybody have pictures or run into the same
> problem. I may have just place the triangle rib supports a tad bit
> outboard than I should have.
>
> Thank you for your time and consideration.
>
> Cheers,
>
> Jeff Paris Kit # A012 Classic Monowheel
>
>
> _______________________________________________
> Join Excite! - http://www.excite.com
> The most personalized portal on the Web!
>
>
|