John Heykoop wrote:
> I was told by Andy Draper that I would have to demonstrate compliance with
> CS-VLA925 if I wanted to fit a propeller with a diameter of more than 64" to
> my Europa XS monowheel.
>
> He said I would have to be able to demonstrate a minimum ground clearance of
> 230mm, with the aircraft fully loaded, in a level attitude and with a flat
> tyre.
I don't have to show compliance here, but this requirement is a good
indication. I guess that I will be allright with my 300mm clearance,
with an inflated tyre. Thanks!
--
Frans Veldman
|