If anyone needs new plastic ends, I have 2 left from when I changed to meta
l and will ship them to the first address I receive.
Jim Puglise A-283
----- Original Message -----
From: "Raimo Toivio" <raimo.toivio@rwm.fi>
Sent: Tuesday, June 23, 2009 9:42:21 AM GMT -05:00 US/Canada Eastern
Subject: Re: Europa-List: Gas strut end sockets
Frans
I had similar problems with plastic sockets.
The P2 side=C2=B4s ball popped almost always out when opened the door.
I just changed them between (P2 to P1 and P1 to P2) and that made a one min
ute trick.
I do not know why. After it/they have never popped out.
Raimo OH-XRT
----- Original Message -----
From: "Frans Veldman" <frans@paardnatuurlijk.nl>
Sent: Sunday, June 21, 2009 12:46 PM
Subject: Re: Europa-List: Gas strut end sockets
l>
>
> Jim,
>
> > I just installed them and they will not come off the ball no matter
> > what I try. =C2-There is a small clip on them that appears to hold th
e
> > fixture to the ball, but it still won't come off the ball when you
> > remove it. =C2-They will probably fix your problem.
>
> Are you talking about the metal end sockets, or the plastic ones? The
> plastic ones I received with my kit were never strong to begin with, but
> time and heat have deformed them enough to allow the ball to pop out
> without any effort.
> If the new plastic ones have a clip then that would suit my needs too,
> otherwise I will just go for the metal ones.
>
> --
> Frans Veldman
>
>
>
>
>
>
===========
===========
MS -
===========
e -
=C2- =C2- =C2- =C2- =C2--Matt Dralle, List Admin.
===========
|