David=2C
you are right of course=2C but i have been led to believe that the other so
lution works okay also and gives accurate readings by changing this k-facto
r. maybe if i change to gallons=2C but i have no interest in gallons. i jus
t won't use it for a while.
Karl
> From: davidjoyce@doctors.org.uk
> To: europa-list@matronics.com
> Subject: Re: Europa-List: FS450 calibration
> Date: Mon=2C 3 Aug 2009 20:54:06 +0100
>
uk>
>
> Karl=2C I have a 914 with FS450 and 2 transponders. My understanding is t
hat
> the flow through the filters=2C pump/s and pressure valve and return line
is
> considerably in excess of the normal fuel consumption=2C and depends on t
he
> efficiency of your pumps how clean the filters are=2C and the calibre of
the
> fuel lines. Although the flow to the pressure valve will increase with
> greater engine power & fuel consumption=2C it will not be in strict propo
rtion
> as there is considerable flow through the valve and the return pipe when
the
> engine is not running. In consequence you cannot hope to get a reliable
> indication of fuel consumption without measuring fuel flow out & return &
> getting the instrument to subtract them. Regards=2C David Joyce=2C G-XSDJ
> ----- Original Message -----
> From: "Karl Heindl" <kheindl@msn.com>
> To: <europa-list@matronics.com>
> Sent: Monday=2C August 03=2C 2009 1:21 PM
> Subject: RE: Europa-List: FS450 calibration
>
>
>
>
> 912s. I don't think there is a solution=2C except that second transponder
. I
> set the K to 99.99=2C but flow rate is 27 litres. the automatic option sh
ould
> work=2C but the crappy software seems to truncate the internally computed
> k-factor also.
>
>
> Karl
>
>
>
>
>
>
>
> > From: davidjoyce@doctors.org.uk
> > To: europa-list@matronics.com
> > Subject: Re: Europa-List: FS450 calibration
> > Date: Mon=2C 3 Aug 2009 09:10:23 +0100
> >
> > <davidjoyce@doctors.org.uk>
> >
> > Karl=2C What engine? David Joyce
> > ----- Original Message -----
> > From: "Karl Heindl" <kheindl@msn.com>
> > To: <europa-list@matronics.com>
> > Sent: Friday=2C July 31=2C 2009 7:52 PM
> > Subject: Europa-List: FS450 calibration
> >
> >
> >
> >
> > I am trying to calibrate the K (fudge) factor for the above fuel flow
> > computer. I have only one transducer and want displays in liters.
> >
> > My re-computed K-factor is way above the limit of the input field=2C wh
ich
> > is
> > limited to 2 digits.
> >
> > There is supposed to be a way of using just the one transducer=2C but h
ow do
> > you do it ?
> >
> > Perhaps the automatic option ? The guy at JPI tells me that I must have
2
> > transducers.
> >
> > Any help appreciated.
> >
> >
> >
> > Karl
> >
> >
> >
> >
> >
> >
> ===========
> ===========
> ===========
> ===========
> >
> >
> >
>
>
===========
===========
===========
===========
>
>
>
|