Don't forget a 'non-return valve' has to be installed as well.
Tim Ward
12 Waiwetu Street'
Fendalton,
Christchurch.
NEW ZEALAND
Ph. 64 3 3515166
Mob 021 0640221
Email ward.t@xtra.co.nz
----- Original Message -----
From: "Flying Farmer" <rpwheelwright@yahoo.co.uk>
Sent: Friday, October 16, 2009 9:27 AM
Subject: Re: Europa-List: Monowheel master cylinder?
> <rpwheelwright@yahoo.co.uk>
>
> Please don't throw loose articles at me from around your work shop's
> But aren't the Mono Brake cylinders ( Trigear Toe Brakes ) A sealed unit
> and only work when the top filling plug is installed?
> If this is so, simple pluming a reservoir will not work as it will not
> take the pressure when the lever is pulled.
> A simple short tube screwed into the master cylinder, then the original
> plug screwed onto the top to seal the unit. This will allow for extra
> fluid and allow for the wear down of the pads.
>
> I could be wrong!!!
>
>
> Visit - www.EuropaOwners.org
>
>
>
|