David-
I am in the build stage yet so have not yet selected a fluid.=C2- I hope
you disassembled and cleaned the inside of the cylinders and the hole that
goes through the middle.=C2- I disasssembled mine and found all sorts of
crap in it before cleaning.=C2- There is an allen screw in each side.=C2
- Remove them and pass a wire through it.=C2- You should be able to see
from one side to the other.=C2-
Jim Puglise A-283
----- Original Message -----
From: "Steade" <steade@btinternet.com>
Sent: Monday, January 25, 2010 11:21:47 AM GMT -05:00 US/Canada Eastern
Subject: Europa-List: Finger Brakes
Hi
I'm a bit more advanced with my finger brake problem now but what has come
up is the quality of the original Jamar part and its suitability for the Eu
ropa particularly if silicone based brake fluid=C2-has to be used.
It seems some owners have changed the Jamar products to modified toe brake
cylinders and then used standard red brake fluid.
Any information on this subject would be helpful.
Regards
David Steade
==
|