Mike,
OK, I see what you have there. Yes, the same banjo parts are available here on
this side of the pond (http://www.anplumbing.com).
I had hoped that what you used was a banjo hose end. Now that I know what you
did, I need to locate a proper female AN flared fitting hose end to replace the
90 degree hose end provided. Perhaps I can go to anplumbing.com and find the
hose end as they have the banjo, bolt and washers.
Thanks muchly for your help,
Bob Borger
PS - That also means that I can use the same sort of banjo setup on the bottom
of the Europa supplied hand master cylinder.
That provides interesting opportunities.
On Monday, March 08, 2010, at 01:29PM, "Mike Parkin"
<mikenjulie.parkin@btinternet.com>
wrote:
>
|