thanks jeff
JEFF ROBERTS wrote:
> Will,
> It's been a while but as I remember I used an aluminum spacer between
> the bottom hinge and the fuselage. So it would set right even with the
> fuselage I taped the spaces to the bottom hinge around the edges only.
> The applied a small amount of redux mixed with a bit of flox to the
> area on the fuselage where the spacer would rest. Make sure you have
> release tape anywhere the goo might touch. The idea was to use the
> mixture as a way see that the door & hinges would be flush when
> closed. You would want to trial fit everything with the spacer taped
> to the hinge first. If the door is proud of the fuselage top then
> remove some of the spacer with a grinder then re fit. If your door is
> low when fitted then you can add some more redux flox mixture. I
> remember having to sand just a small amount of the door top to come
> out exactly to the fuselage top but at least you know the hinges fit
> perfectly even this way.
> Hope this helps,
>
> Jeff R. N128LJ Gold Rush 220 hours and enjoying every flight I can
> get between rainy cold days. Would someone tell Al to get the global
> warming turned back on?
>
> *
>
> *
|