That's exactly what I did, I used 1 1/2 cotton reel rubber mounts to stand off
the instrument panel, It gives enough space to fit a Garnin SL30 and GTX327 and
Dynon EFIS/EMS with room to spare, (just :-)
Ivor
G-IVER
---- Fred Klein <fklein@orcasonline.com> wrote:
>
>
> On Mar 24, 2010, at 10:20 AM, Paul McAllister wrote:
>
> > The challenge I have with the factory panel is more around internal
> > volume, in particular its depth rather than the external area.
>
> Paul,
>
> I'm wondering if the depth issue is solved by floating the panel on
> those shock-mount studs with the rubber spacer of approx. 3/4",
> removing of course the back of the instrument panel module except in
> the areas where it is reinforced and acts as a flange for the studs?
>
> Fred
>
>
>
>
|