It's perhaps worth saying that I have a GTX328, an SL 30 and a Flydat
mounted on the right side of the standard factory panel fixed flush to the
firewall together with prop controller, intercom ,pitch trim & sundry
contact breakers & warning lights. It was a reasonably tight fit but not one
only possible with gynaecological skills! Could send picture if any help.
Regards, David Joyce, G-XSDJ
----- Original Message -----
From: <ivor.phillips@ntlworld.com>
Sent: Thursday, March 25, 2010 6:34 PM
Subject: Re: Europa-List: Full Panel
>
> That's exactly what I did, I used 1 1/2 cotton reel rubber mounts to stand
> off the instrument panel, It gives enough space to fit a Garnin SL30 and
> GTX327 and Dynon EFIS/EMS with room to spare, (just :-)
> Ivor
> G-IVER
> ---- Fred Klein <fklein@orcasonline.com> wrote:
>>
>>
>> On Mar 24, 2010, at 10:20 AM, Paul McAllister wrote:
>>
>> > The challenge I have with the factory panel is more around internal
>> > volume, in particular its depth rather than the external area.
>>
>> Paul,
>>
>> I'm wondering if the depth issue is solved by floating the panel on
>> those shock-mount studs with the rubber spacer of approx. 3/4",
>> removing of course the back of the instrument panel module except in
>> the areas where it is reinforced and acts as a flange for the studs?
>>
>> Fred
>>
>>
>>
>>
>
>
>
|