Hi Alll,
I neglected to mention that I was looking for stainless steel bolts. My
concern is that if I used steel bolts that they would seize and be
impossible to remove.
Interestingly enough the bolt is listed in the parts catalog but without a
part number.. go figure
Paul
On Tue, Aug 17, 2010 at 12:59 AM, Michael Grass <m.grass@comcast.net> wrote:
> Paul,
>
> Have you considered just to get the 20 mm version and cut it down to 6mm?
> The thread on the 20mm should go up to the shoulder of the head and the
> application is uncritical anyway.
>
|