Hi Graham=2C Nev=2C
Yes=2C I bought a new Warp Drive from Europa and they sent a spinner as des
cribed by Nev. I had to replace it with an original Europa spinner.
Also bought the Airmaster and that comes with spinner backplate etc. looks
like excellent quality. Test flying on Warp Drive.
Dave P
Subject: Re: Europa-List: Re: cowl cutting - bak edge
From: neveyre@aol.co.uk
Date: Wed=2C 9 Mar 2011 03:27:44 -0500
Hi Graham=2C
Had a thought=2C where did you get the spinner from ?
The original XS spinner was as I described with about a 1'' flange aft of t
he prop hub face=2C for some reason Europa have supplied non original spinn
er assemblies plucked it seems=2C at random=2C from an outside supplier [ I
think Dave Park had one of those which he sent back] sets the entire spinn
er too far forward.
Luke 23=2C 34 Nev.
-----Original Message-----
From: graeme bird <graeme@gdbmk.co.uk>
Sent: Tue=2C 8 Mar 2011 21:27
Subject: Europa-List: Re: cowl cutting - bak edge
Graham=2C checking again I am compliant with the 1" back from the front of
the
flange as it says in the manual=2C so it must be the spinner that doesnt co
me back
enough.
--------
Graeme Bird
G-UMPY
Mono Classic/XS FWFD 912ULS/Warp drive FP
Build nearing completion
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=333250#333250
arget=_blank>http://www.matronics.com/Navigator?Europa-List
p://forums.matronics.com
blank>http://www.matronics.com/contribution
|