Andrew
I did exactly what you are planning. By my calculations the original
bulkhead infringed the access hole. The curved bulkhead works well. Pics
attached I hope.
Regards
Lance SAndford in Oz
On 08/01/2011 03:47 AM, Andrew Sarangan wrote:
> --> Europa-List message posted by: Andrew Sarangan<asarangan@gmail.com>
>
> The reason for my confusion is, the suggested location of the plywood
> would cut halfway through the fuel valve access hole on the starboard
> side of the tunnel (page 17-2 of the manual). Since the fuel valve
> has to be aft of this plywood bulkhead, I can't see how this setup
> would work without moving the plywood further forward, or making it
> conform to the wheel well curvature.
|