Michel=0Ayour English is better than my French!=0AGraham=0A=0A=0A=0A=0A=0A_
_______________________________=0AFrom: mau11 <mau11@free.fr>=0ATo: europa-
list <europa-list@matronics.com>=0ASent: Tuesday, 30 August, 2011 17:38:00
=0ASubject: Re: Europa-List: Re: Outriggers lenght=0A=0A I replace my outri
gger yesterday, and for disengage the nylon from the two end =0Afittings i
t is impossible.=0A =0AI use this solution, I cut the nylon leg near the 2
fittings with metal saw, =0Aand on each of the to fittings drill =C3- ho
le (1/4) on the center of the leg.=0AAfter use a wooden drill (30 mm diame
ter) and drill slowly the nylon. You =0Afollow the axle center of the leg.
=0A =0ASorry for my bad english if you don't understand contact me off list
.=0A =0AMichel AUVRAY=0ABuilder 145 =0A=C2=C2=B7=BA~=B0=C3
=AD=C2=B2,=C3=9Eg(=93=C5-=C3=93M4=C3=93G=C3=9Aq=C3=BC=C2=A2=C3
=C3=A2z=C2=B9=C3=9E=C3=81=C3=8A.=C2=AE'=C2=AB8^=C3=C3=A8=C2=A5=C2=A2=C3
=A2=C2=B2=C3=91&j)E=C2=A2=C2=BB=C2K=C2=B6=C5=92j=C3=9A=C3=A8=C5=BE',.+-
=C3=C2=AD=C2=BA=C2=B7=C2=AC5=C2=AB=C3=A2=EF=BD=C2=ABh=C2=AE=C3=9A=C2
=AE=C5=92,{azf=C2=A7=C3=88=C2=B8=C2=AC=C2=B6=C3=ABb=93+bz=C3=8B.r=C2
=AC.+-R=C3=92=C2=B9=C2=BB=C2=AE*m=C5-=B0=C2=B7!=C5-=C3=B7
=99y=C2=C3=9C=9E:0=C5=BEZw=C2=B0=C3=9A=C3=88=C3=A8=C3=82=C3=87
=9A=C2=ABE-=B9h=C2=B2=C2=ABy=C2=A9=C3=9D=C5=A1=C3
=A7!=C5=A1=C3=A7!=C5=A1=C5-=C3=9E=C2=A1=C2=AD=C3=A7-=C3=9Bi=C3
=C3=BC0=C3=82f=C2=AD=C2=AE=B0=C3=A2r=C3=87(=BA=C3=B3Z=C2=BE(=C2
=B6=C5-=C3=84=C2=BA=C2=BA)h=C2=B8=C2=AC=C2=B6m=C2=A7=C3=C3=B0=C3=83
=C5=A1=C2=B6=C2=BA'=B0=C3=8B=C2=A2o=C3=8Dj=C3=B8 j=C3=9A+=C3=C3=A8
=C2=A5=C2=A2=C3=A2=C2=B2=C3=9F=C3=9A=0A
|