Hi Jim
just a thought have you fitted the four spacers for the torque plate and
brake pads
I also used some copperslip between the spacers for lubrcation, another
problem i had in the early days was the allen screws hold the discs to the
wheels became loose even with the locking wire, this caused some noise when
taxying, solved it by using loctite and locking wire,
regards
ivor
G-IVER
On 30 November 2011 17:58, <jimpuglise@comcast.net> wrote:
> I used the kit-furnished Jamar brake cylinders and Matco calipers. The
> brakes work fine, but there is about 1/8 play if you wiggle the calipers,
> and they chatter like crazy while in motion. If I exert just enough
> pressure to move the pucks a little, the chatter disappears. It appears to
> me that there is too much play in the calipers, but we checked the
> drawings, and everything is installed properly.
>
> Any ideas?
>
> Jim Puglise
> N283JL, now at 10.2 hours
>
> *
>
> *
>
>
|