Hi Gerry, Paul Munford from Cambridge (uk). Very interested in your
flying model. Where are you & how much ?? Please contact me directly on
pmdental@btinternet.com. Thanks
----- Original Message -----
From: Gerry Holland
To: europa-list@matronics.com
Sent: Saturday, December 17, 2011 7:36 AM
Subject: Europa-List: Flying Model of Europa
Hi to all.
As some interest was shown in Desktop type models of Europa, would
anyone be interested in buying a Europa Flying Model I have and will
most likely never start.
It is one of the RC Homebuilts models produced by Cleve Lee a Europa
Builder and details are as follows:
Scale: 1= 5.30 Wingspan:
61 1=81=842=9D (1562 mm) Wing Area: 550 in2 (3549 dm2)
Flying Weight: 6.8 =93 7.5 lbs (3.09 =93 3.41 kg)
Wing Loading: 29 oz/ft2
Length: 44=9D (1118 mm)
Radio: 5 Channels with 7 servos Engines:
.40 - .51 cu in 2 Cycle
.50 =93 .60 cu in 4 Cycle
It is presently 'hangared' in Ashland, MA but could be sent anywhere.
I'm in England BTW.
If you are interested please PM me at gholland@content-stream.co.uk
Picture from Build Manual attached.
Regards
Gerry
Gerry Holland
gholland@content-stream.co.uk
+44 (0)7808 402404
White Ox Mead, Bath. England
|