On Mar 29, 2012, at 12:03 PM, Europaul383 wrote:
> The replacement tailwheel horn is 4=94 between cable attach hole
> centres, but I also have a drawing (attached) for a similar horn,
> with 5=94 between centres ... confusingly I have annotated this with
> an amendment of 6=94...???
>
> So - is it 4" between centres as supplied; 5" as per the drawing; or
> 6"?
Paul,
In a conversation with William Mills at Sun N Fun some years ago, he
left me w/ several bits of advice...one of which was to make a rudder
horn which provides for 4", 5", and 6" between centers...doing initial
flight tests at the 6" spread and reducing the spread as the comfort
zone expands. I made mine from .125" 4130 steel.
Fred
|