For comparison with others I measure twist as the
difference between the tip and the bit 1/3 out from the
centre. The SR300W, all turbo props, Red Bull racers and
any old prop driven fighter will have twists of around 26
degrees whereas SR2000s & Warp Drives have twists around
only 12 degrees. I had assumed that the Arplast is similar
but would be interested in an actual measurement. Regards,
David Joyce, G-XSDJ
"zwakie" <mz@cariama.nl> wrote:
><mz@cariama.nl>
>
>
> grahamsingleton@btinte wrote:
>> Marcel
>> You might find that the Arplast is already fairly high
>>twist. It's a good robust prop. If you speak French talk
>>to Alain Petit,
>> He does speak some English. His daughter Laeticia runs
>>the props business, (last time I was there) Her English
>>isn't bad either.
>> Graham
>
> I was thinking the same about the twist for the PV50.
>Unfortunately the prop is in such a state now that I
>cannot measure the twist, I could not find technical
>specs for the PV50 on the internet either. Anybody out
>there that has the specs on the PV50 and willing ot
>share?
>
> --------
> Marcel
> (Europa Classic Tri-Gear PH-MZW)
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=381445#381445
>
>
>
>
>
>
>
>Un/Subscription,
>Forums!
>Admin.
>
>
>
|