Hi Carl.
I have the same 1mm. at the TP12 PLATE.
If you are saying you have removed the Stabilator and are now gripping the TB12
plate and it moves 1mm , this would scale up to about 1/2" at the trailing edge
of the Stabilator if it was in-place.
There are pins on the TB12 and on the TB9 your idea would only make good the
TB12
pins, and the play might be in the TB9 Bell-crank in the centre of the
fuselage.
I agree, Yes it is complicated,
Alan
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=385408#385408
|