Ah now I get it.
NEMA output and then RMC & RMB.
Based on what's used on my Trutak set up.
Speed is 4800
Probable best if you ring or let me know when you next at WAP and I can help
.
Alan
Sent from my iPhone
On 15 Aug 2013, at 12:11, " Peter Jeffers" <pjeffers@talktalk.net> wrote:
> Hi Alan,
> OK my problem is what boxes to tick on the Lowrance setup.
>
> The first page gives a choice of NMEA output, NMEA input, or NMEA GPS inp
ut. I presume I should tick the first one ie NMEA output.
>
> Once you make this choice then you have to CONFIGURE NMEA, this gives me t
he option of choosing one or more of the following:- GLL, RMC & RMB, GG
A, GSA & GSV, or APB.
>
> All this leaves me stone cold as I have no idea what any of these options m
ean or refer to. Have you any thoughts on any of that?
>
> Hopefully
>
> Pete
>
> From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-ser
ver@matronics.com] On Behalf Of Alan Burrill
> Sent: 14 August 2013 22:26
> To: europa-list@matronics.com
> Subject: Re: Europa-List: Coms port settings
>
> Peter,
>
> The manual here: http://www.sportys.com/source/slashpages/manuals/2034.pdf
>
>
> Appears to quite detailed on Page 82. The only ref to manufacturers is wit
h ref to the wiring for the unit.
>
>
> Is it the settings or the wiring?
>
>
> Alan
> Sent from my iPad
>
> On 13 Aug 2013, at 13:22, " Peter Jeffers" <pjeffers@talktalk.net> wrote:
>
>> Hi Craig,
>> Thanks for that. I have got the original manual but all it says about th
e settings is that you need to set the send and receive ports according to L
owrance support. Lowrance support does not support the 2000c any more and h
ave not do so for about three years hence they are useless as far as assista
nce is concerned.
>>
>> I guess I need help from someone who set their system up a few years back
.
>>
>> Pete
>>
>> From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-se
rver@matronics.com] On Behalf Of craig
>> Sent: 13 August 2013 13:08
>> To: europa-list@matronics.com
>> Subject: RE: Europa-List: Coms port settings
>>
>> I have had some success getting workshop manuals etc for older stuff off e
bay, people running the manuals
>> Through a photo copier and outputting it to a PDF file then selling the t
hing on CD for a few bucks
>>
>> Worth a look, good luck
>>
>> craig
>>
>>
>>
>>
>>
>>
>> http://www.matronics.com/Navigator?Europa-List
>> http://forums.matronics.com
>> http://www.matronics.com/contribution
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
|