Guys,
You can also use a small washer to prevent the cleco from pulling
through the fiberglass. Just be sure to grease it and the cleco well or
you=99ll play heck getting them out again ;^)
Blue skies & tailwinds,
Bob Borger
Europa XS Tri, Rotax 914, Airmaster C/S Prop (75 hrs).
Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP
3705 Lynchburg Dr.
Corinth, TX 76208-5331
Cel: 817-992-1117
rlborger@mac.com
On Jan 7, 2015, at 6:16 PM, Greg Fuchs <gregoryf.flyboy@comcast.net>
wrote:
Dave: Yeah, many hands will be needed for sure, ...or if masochistic
work at leisure in cold temps and heat the place up to cure the glue :)
Fred: I have a number of holes that have pulled thru already that will
need the procedure. Will have to remember to use a proper-size drill bit
to look for ones that are close to failing, to prevent 'gotchyas' during
the procedure.
|