Bill,
Go on my website www.customflightcreations.com and download the bleeding
procedure in the Techniques section.
For your setup use only Dot 5 (not 5.1) and it works with everything as its
silicone.
Read the bleeding procedure for the Jamar. Then loctite in the Allen head
pivot bolts because they do eventually loosen and you are blessed with one
brake handle in your hand when least expecting it and needing to brake.
Regards,
Bud Yerly
-----Original Message-----
From: bill mcclellan
Sent: Tuesday, January 20, 2015 3:03 PM
Subject: Europa-List: Jamar finger brakes
I have installed the Jamar dual brake cylinders and I have Grove brakes. It
appears that Jamar requires Dot 3 or 4 brake fluid and Grove requires
MIL-5606 hydraulic fluid as does Matco. I don't believe these two fluids
are not compatible. Does anyone have Jamar brakes cylinders with Grove or
Matco brakes? If so what brake fluid do you use and find compatible with
this brake combination?
Thanks,
Bill McClellan
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=437336#437336
|