Replaced mine last year and used normal oil hose with no bends and no 90 deg
bend
on the pump.
route of hose work ok without any kinks or tight bends.
Alan
G-OBJT
> On 3 Mar 2015, at 04:59, Martin Tuck <MJKTuck@cs.com> wrote:
>
>
> Hi All,
>
> I'm looking to replace my oil hoses. The one from the pump to the radiator has
a 90 deg bend in it. I had noted that it was suggested I contact Lockwood as
they have a metal 90 deg adapter to which regular hose could be fitted. I
contacted
them and they said just to use 'an AN fitting size -8'. Looking at the
manual though the thread seems to be 14.4mm so I'm not sure what they meant now.
I wonder if they meant to make a 90 deg elbow using AN fittings. I couldn't
figure the parts I would need though.
>
> Any help as to what others have done would be appreciated.
>
> Also, are there any US sources for the rubber engine mounts or are they
> uniquely
Europa, in which case I would contact the factory in the UK.
>
> Regards,
> Martin Tuck
> N152MT
> Wichita, KS
>
>
>
>
|