So did I with normal (but adequate) oil hose. Just take of care of the route
you give to it and avoid short turns!
Max Cointe
F-PMLH Europa XS_TriGear
Kit #560-2003 912ULS/AirmasterAP332 540 hours
F-PLDJ DynAro MCR 4S
Kit #27-2002 912ULSFR/MTProp MTV7A 1660 heures
-----Message d'origine-----
De: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] De la part de Alan Burrill
Envoy: mardi 3 mars 2015 08:08
: Europa Forum Forum
Objet: Re: Europa-List: Oil Hose
Replaced mine last year and used normal oil hose with no bends and no 90 deg
bend on the pump.
route of hose work ok without any kinks or tight bends.
Alan
G-OBJT
> On 3 Mar 2015, at 04:59, Martin Tuck <MJKTuck@cs.com> wrote:
>
>
> Hi All,
>
> I'm looking to replace my oil hoses. The one from the pump to the radiator
has a 90 deg bend in it. I had noted that it was suggested I contact
Lockwood as they have a metal 90 deg adapter to which regular hose could be
fitted. I contacted them and they said just to use 'an AN fitting size -8'.
Looking at the manual though the thread seems to be 14.4mm so I'm not sure
what they meant now. I wonder if they meant to make a 90 deg elbow using AN
fittings. I couldn't figure the parts I would need though.
>
> Any help as to what others have done would be appreciated.
>
> Also, are there any US sources for the rubber engine mounts or are they
uniquely Europa, in which case I would contact the factory in the UK.
>
> Regards,
> Martin Tuck
> N152MT
> Wichita, KS
>
>
>
>
|