Hi William,
If it=99s a 912 you are fitting, here is a comprehensive reply
---From Bud Yearly when I asked the same question. Note the issue of the
lower coolant hoses and changing the angle of one of the lower coolant
hose nozzles from the water pump while you have it off. All not too
difficult when you remove the right bits. I didn=99t have to
remove the starter motor.
Good luck!
Regards,
Keith Hickling
New Zealand.
From: William Daniell
Sent: Sunday, March 29, 2015 10:55 AM
Subject: Europa-List: Ring mount to engine
Im am fitting the ring mount to engine. There is a lot of stuff in the
way...for example coolant hoses to the cylinder heads and some of the
wiring.
I dont want to remove any more than I have to. What needs to be removed
in order to fit the ring mount? For example does one need to remove the
starter motor?
Thanks in advance
Will
|