Hi All,
You can get set for carbs here:
MotoKristen
8-10 Rue du Marchal Joffre
10200 BAR SUR AUBE
E-mail :philippe@motokristen.com <mailto:philippe@motokristen.com>
Tlphone : 03.10.11.00.50
Web : http://www.pieces-moto-kristen.fr <http://www.pieces-moto-kristen.fr/>
*Articles*: Kit de rfection carburateur BING pour BMW partir de 1970
*Rfrenc*e : MK13952
Regards
*Alain CHABERT*
e-mail : _alainchabert@wanadoo.fr_
Le 19/09/2015 10:59, John Archer a crit :
>
> Hi Jon, you can get a gasket set for both carbs for about 40 euros from Avirex
here:
> http://www.avirex.fr/catalogue,22/produits/kits-pochettes-consommables/pochettes,60/
> Their prices are competitive, especially if you are paying in gbp. You could
buy individual o rings but you need to know the sizes.
> Regards John
>
>
>> On 19 sept. 2015, at 09:02, Europa-List Digest Server
>> <europa-list@matronics.com>
wrote:
>>
>> *
>>
>> =================================================
>> Online Versions of Today's List Digest Archive
>> =================================================
>>
>> Today's complete Europa-List Digest can also be found in either of the
>> two Web Links listed below. The .html file includes the Digest formatted
>> in HTML for viewing with a web browser and features Hyperlinked Indexes
>> and Message Navigation. The .txt file includes the plain ASCII version
>> of the Europa-List Digest and can be viewed with a generic text editor
>> such as Notepad or with a web browser.
>>
>> HTML Version:
>>
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter
>> 15-09-18&Archive=Europa
>>
>> Text Version:
>>
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter
>> 15-09-18&Archive=Europa
>>
>>
>> ===============================================
>> EMail Version of Today's List Digest Archive
>> ===============================================
>>
>>
>> ----------------------------------------------------------
>> Europa-List Digest Archive
>> ---
>> Total Messages Posted Fri 09/18/15: 7
>> ----------------------------------------------------------
>>
>>
>> Today's Message Index:
>> ----------------------
>>
>> 1. 02:32 AM - Long shot - mono conversion parts (graeme bird)
>> 2. 06:29 AM - Re: Long shot - mono conversion parts (Steven Pitt)
>> 3. 06:31 AM - Re: Wrapping composite aircraft (Steven Pitt)
>> 4. 07:36 AM - Re: Long shot - mono conversion parts (spcialeffects)
>> 5. 02:18 PM - Re: Wrapping composite aircraft (pestar)
>> 6. 04:09 PM - Re: Re: Wrapping composite aircraft (Alex Kaarsberg)
>> 7. 10:22 PM - Rotax 912 Carburetor - Possible to purchase a few O-Rings?
(italianjon)
>>
>>
>>
>> ________________________________ Message 1
>> _____________________________________
>>
>>
>> Subject: Europa-List: Long shot - mono conversion parts
>> From: "graeme bird" <graeme@gdbmk.co.uk>
>>
>>
>> A long shot I know, but wondered if anyone has any mono to tri gear or
>> conventional
>> tail dragger conversion parts they would consider cashing in/selling to me?
>>
>> Bucks UK.
>>
>> --------
>> Graeme Bird
>> G-UMPY
>> Mono Classic/XS FFW 912S/Woodcomp 3000/3W
>> Newby: 180 hours 4 years on the Mono
>> g@gdbmk.co.uk
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=447181#447181
>>
>>
>> ________________________________ Message 2
>> _____________________________________
>>
>>
>> From: "Steven Pitt" <steven.pitt2@ntlworld.com>
>> Subject: Re: Europa-List: Long shot - mono conversion parts
>>
>>
>> Speak to Nigel Graham (or the factory).
>> Steve Pitt
>> ----- Original Message -----
>> From: "graeme bird" <graeme@gdbmk.co.uk>
>> Sent: Friday, September 18, 2015 10:24 AM
>> Subject: Europa-List: Long shot - mono conversion parts
>>
>>
>>> A long shot I know, but wondered if anyone has any mono to tri gear or
>>> conventional tail dragger conversion parts they would consider cashing
>>> in/selling to me?
>>>
>>> Bucks UK.
>>>
>>> --------
>>> Graeme Bird
>>> G-UMPY
>>> Mono Classic/XS FFW 912S/Woodcomp 3000/3W
>>> Newby: 180 hours 4 years on the Mono
>>> g@gdbmk.co.uk
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=447181#447181
>>
>> ________________________________ Message 3
>> _____________________________________
>>
>>
>> From: "Steven Pitt" <steven.pitt2@ntlworld.com>
>> Subject: Re: Europa-List: Wrapping composite aircraft
>>
>> William,
>> Jeff Behrnes (Baby Blue) in Baton Rouge has been involved in aircraft
>> graphics and wrapping for some years. If you can get hold of him he may
>> be able to help.
>> Regards
>> Steve Pitt
>> ----- Original Message -----
>> From: William Daniell
>> To: europa-list@matronics.com
>> Sent: Thursday, September 17, 2015 6:56 PM
>> Subject: Europa-List: Wrapping composite aircraft
>>
>>
>> Has anyone wrapped a Europa?
>>
>>
>> I have not yet been able to find anyone with experience of finishing a
>> composite aircraft in Bogota so I was thinking that this might be an
>> interesting alternative.
>>
>>
>> Thanks
>>
>>
>> Will
>>
>>
>> William Daniell
>>
>> LONGPORT
>>
>> +57 310 295 0744
>>
>>
>> ________________________________ Message 4
>> _____________________________________
>>
>>
>> Subject: Europa-List: Re: Long shot - mono conversion parts
>> From: "spcialeffects" <spcialeffects@aol.com>
>>
>>
>> Graeme, why the conversion?
>>
>> Frank Xuereb kit#165
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=447193#447193
>>
>>
>> ________________________________ Message 5
>> _____________________________________
>>
>>
>> Subject: Europa-List: Re: Wrapping composite aircraft
>> From: "pestar" <peter@reivernet.com>
>>
>>
>> On my DynAero MCR-4S, all the graphics are vinyl not painted. Where the
>> there
>> was a major colour ie white, light blue (underneath wings) - this was
>> painted.
>>
>> While computer cut graphics give great flexibility in your design I caution
you,
>> it is not how it looks after completion but how it looks in 4 years time.
>> Looking
>> after vinyl graphics on a plane is a lot more difficult than looking after
>> paint, vinyl can get tatty, do not like being exposed to 120 knot winds and
>> do not have the same lustre finish as paint.
>>
>> Knowing what I know now I would probably have done my design in paint rather
than
>> vinyl.
>>
>> Trust this helps
>>
>> Cheers Peter
>>
>> --------
>> Peter Armstrong
>> Auckland, New Zealand
>> DynAero MCR-4S (Do not shoot me :) ).
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=447201#447201
>>
>>
>> Attachments:
>>
>> http://forums.matronics.com//files/zk_psa_150.jpg
>>
>>
>> ________________________________ Message 6
>> _____________________________________
>>
>>
>> From: Alex Kaarsberg <kaarsberg@terra.com.br>
>> Subject: Re: Europa-List: Re: Wrapping composite aircraft
>>
>>
>> A tip I learnt on mach .8 planes, stickers well placed and free from
>> blisters,
>> edge seal with superglue- simply apply a thin bead along the edge of the
>> adhesive
>> and let it harden, or use an accelerator spray.
>>
>> Alex Kaarsberg
>>
>>
>>> On 18/09/2015, at 18:16, pestar <peter@reivernet.com> wrote:
>>>
>>>
>>> On my DynAero MCR-4S, all the graphics are vinyl not painted. Where the
>>> there
>> was a major colour ie white, light blue (underneath wings) - this was
>> painted.
>>> While computer cut graphics give great flexibility in your design I caution
you,
>> it is not how it looks after completion but how it looks in 4 years time.
>> Looking after vinyl graphics on a plane is a lot more difficult than looking
>> after paint, vinyl can get tatty, do not like being exposed to 120 knot winds
>> and do not have the same lustre finish as paint.
>>> Knowing what I know now I would probably have done my design in paint rather
>> than vinyl.
>>> Trust this helps
>>>
>>> Cheers Peter
>>>
>>> --------
>>> Peter Armstrong
>>> Auckland, New Zealand
>>> DynAero MCR-4S (Do not shoot me :) ).
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=447201#447201
>>>
>>>
>>>
>>>
>>> Attachments:
>>>
>>> http://forums.matronics.com//files/zk_psa_150.jpg
>>
>> ________________________________ Message 7
>> _____________________________________
>>
>>
>> Subject: Europa-List: Rotax 912 Carburetor - Possible to purchase a few
>> O-Rings?
>> From: "italianjon" <jon.catilli@gmail.com>
>>
>>
>> Hi All,
>>
>> I am wondering if it is possible to purchase a few O-Rings for a Rotax Carb,
without
>> buying the complete and expensive overhaul kit.
>>
>> I have a couple that are missing and/or cracked.
>>
>> Using Fig 73-14 of the latest issue Heavy Maintenance Manual as a guide, I am
looking
>> for 2 x O-Rings that dampen the needle (38) and 1 x O-Ring for the Idle
>> Mixture Screw (37).
>>
>> Thanks
>>
>> Jon
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=447221#447221
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
|
