Hi All,
MOD 72 seems like a simple enough MOD so I thought I would start here to upgrade
my yet to be finished project. Things, it appears, are never that easy.
I was viewing some images of other builders who have completed this MOD and was
surprised to see in some pictures that the builder was spraying the inside of
the engine mount with the Etch Primer. My reading of the instructions lead me
to think I needed to paint the insert and the bore of the insert only i.e.
leaving
the bore of the engine mount as is after reaming.
So ...I contacted Europa who advised.....
"As written, long before my time here, it seems to say just the bore of the
insert
but I would suggest including the bore of the engine mount as well."
Just wondering what the folk who have conducted this MOD done regarding the
application
of the Etch Primer?
Many thanks
Tony
Sydney
Australia
S/N A011
--------
Tony Vaccarella
Mascot NSW 2020
Sydney Australia
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=450307#450307
|