On 2016-12-14, at 22:03, G-ODTW <dave@robotas.co.uk> wrote:
> I had an= 1/8" aly strip in my firewall fwd kit, 25mm * 257mm, in a poly bag
mysteriously labelled "EURO65". I think it must be to make the "90 degree
angled
bkt".
>
> There is no dwg, so I guess it is wing-it time again.
David - thanks for your message. Yes, I had a EURO65 in my FWF kit too, but
couldnt
find a reference to it in the manual, and nobody seems to know what its for.
Karen searched for something that might be used to make the oil tank bracket
support but she couldnt find anything and said that EURO65 did not appear to
be it.
I am adopting plan B which is to use a longer screw at the top inboard location
and fit it with an aluminium sleeve to provide the correct spacing of the
bracket
---From the indented part of the firewall. I feel this is a better engineering
solution anyway. Not sure if it will count as a mod!
in friendship
Rowland
| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson@gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson
|