I fixed it by fitting a Smartass, easily heard via headset & impossible
to ignore, neither of which can be said for stall warner even when
working - which sounds as a very distant minor squeak using modern
headsets!
Regards, Davi (Joyce, GXSDJ)
On 2017-06-16 22:17, clivesutton wrote:
>
> I have the 0.072 PSI/5mBar/500Pascal Vacuum stall warner switch supplied by
> Europa
fitted in G-YETI (RS Components part No 317-443) but I'm struggling to get
it to work correctly - despite changing the switch for a new one today.
>
> The first switch would not reliably make contact at the stall warn speed
> (light/intermittent
squeaks at varying speeds) and whilst the other does work more
reliably it is closed/the horn sounds once the a/c is back on the ground/at zero
to low forward speed.
>
> Has anyone else had this problem and can share how they fixed it or can anyone
recommend another more reliable switch (based on personal experience in use)
please? The pipe between switch and the hole just below the wing leading edge
is correctly connected to the NO port A btw.
>
> All inputs appreciated
>
> Clive S
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=470177#470177 [1]
>
Links:
------
[1] http://forums.matronics.com/viewtopic.php?p=470177#470177
[2] http://www.matronics.com/Navigator?Europa-List
[3] http://forums.matronics.com
[4] http://wiki.matronics.com
[5] http://www.matronics.com/contribution
|