Best solution is to use short silicone joints to an aluminium elbow, it's m
uch lighter and the silicone is less problematic regarding erosion etc.Tim
Ward organised a batch of nice elbows but that was years ago.It wouldn't be
difficult to weld one up?Graham
On Saturday, 16 December 2017, 9:33, Brian Davies <brian.davies44@gmail
.com> wrote:
m>
Demon Tweeks says in stock 3 day delivery.
Brian
-----Original Message-----
From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-serv
er@matronics.com] On Behalf Of Pete Lawless
Sent: 15 December 2017 18:20
Subject: Re: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017 Al
l Europas
Hi Ivor
Been looking for hose for a standard mod to replace the classic pipe with a
luminium.=C2- The only hose we have found so far that is guaranteed 100%
for petrol is Samco ProFuel. Unfortunately it is on a 42 day lead time.
https://www.merlinmotorsport.co.uk/p/samco-profuel-silicone-coupling-hose-p
sch
Pete
G-RMAC Europa 109 Classic
On 15/12/17 17:53, Ivor wrote:
>
> Hi Duncan
>
> as previously said i managed to get a piece of the original hose from
> Frank Xuereb that will work fine until the next flying season when
> hopefully a more permanent solution is found, IMO if a hose designed
> for fuel cannot be immersed in fuel then it=C3=A2=82=AC=84=A2s not
fit for purpose,
> my last hose lasted at least 5 years before starting to degrade so an
> original hose should be fine until a proper replacement is found,
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=476410#476410
>
>
---
This email has been checked for viruses by AVG.
http://www.avg.com
S -
WIKI -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
|