Hi Richard
John is at 77alembert@gmail.com
Regards
Pete
On 22/12/17 19:51, Richard Lamprey wrote:
>
> Thanks Pete, do you have John Archers contact email?
> Best
> Richard
>
>
> pete@lawless.info wrote:
>> Hi Richard
>>
>> You have a Classic the pictures were for the XS with a side filler. The
>> AD applies to both.
>>
>> I have just inspected mine and whilst the inside looked perfect the fuel
>> tank end was noticeably soft compared to the top section. I intend to
>> replace it with aluminium as per Standard Mod 13070. If you are
>> interested John Archer, who is getting the pipes made, is taking orders now.
>>
>> Regards
>>
>> Pete
>>
>> G-RMAC Classic #109
>>
>>
>> On 21/12/17 07:11, Richard Lamprey wrote:
>>
>>>
>>>
>>> Stupid question, but I will ask anyway... All the examples, photos, LAA
report etc point to the side-filler Europa pipe, with 45 degree bend, which was
an alternative to the top-of-fuselage original filler. I have the latter, the
long pipe coming down through a hole in the rear bulkhead. Was this a different
pipe batch? Inspection shows no problem with mine, I fill to the top before
every flight, ie right up the pipe, then fly, then leave tank with about
3/4 full ie the pipe is not immersed for long. I fly once a month, Nice
constant
temps in Kenya 15-28 C for storage, all seems to be OK.
>>> Best
>>> Richard
>>> Classic 5Y-LRY, Kenya
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=476654#476654
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=476691#476691
>
>
|