I have seen an aluminium tube 45 degree solution on eBay at item number 3007
35817645 for less than =C2=A320. May be suitable.
Dave Watts
G-BXDY
> On 16 Dec 2017, at 14:28, davidjoyce@doctors.org.uk wrote:
>
> Dave, a nice solution, but for those who haven't got a tame aluminium weld
er it might be cheaper to buy a flurosilicone lined angled fuel filler hose f
rom carbuildersolutions.com and use a straight section of alloy tubing to ma
ke up the necessary length. Regards, David, G-XSDJ
>
>
>
>
>> On 2017-12-16 11:27, david park wrote:
>>
>>
>> <image1.jpeg>
>>
>> Simple and cheap did this three years ago without any problem
>>
>> Dave Park
>>
>>
>>> On 16 Dec 2017, at 11:19, GRAHAM SINGLETON <grahamsingleton@btinternet.c
om> wrote:
>>>
>>> Best solution is to use short silicone joints to an aluminium elbow, it'
s much lighter and the silicone is less problematic regarding erosion etc.
>>> Tim Ward organised a batch of nice elbows but that was years ago.
>>> It wouldn't be difficult to weld one up?
>>> Graham
>>>
>>>
>>> On Saturday, 16 December 2017, 9:33, Brian Davies <brian.davies44@gmail.
com> wrote:
>>>
>>>
com>
>>>
>>> Demon Tweeks says in stock 3 day delivery.
>>>
>>> Brian
>>>
>>> -----Original Message-----
>>> From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-s
erver@matronics.com] On Behalf Of Pete Lawless
>>> Sent: 15 December 2017 18:20
>>> To: europa-list@matronics.com
>>> Subject: Re: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017
All Europas
>>>
>>>
>>> Hi Ivor
>>>
>>> Been looking for hose for a standard mod to replace the classic pipe wit
h aluminium. The only hose we have found so far that is guaranteed 100% for
petrol is Samco ProFuel. Unfortunately it is on a 42 day lead time.
>>>
>>> https://www.merlinmotorsport.co.uk/p/samco-profuel-silicone-coupling-hos
e-psch
>>>
>>> Pete
>>>
>>> G-RMAC Europa 109 Classic
>>>
>>>
>>> On 15/12/17 17:53, Ivor wrote:
>>> >
>>> > Hi Duncan
>>> >
>>> > as previously said i managed to get a piece of the original hose from
>>> > Frank Xuereb that will work fine until the next flying season when
>>> > hopefully a more permanent solution is found, IMO if a hose designed
>>> > for fuel cannot be immersed in fuel then it=C3=A2=82=AC=84=A2s n
ot fit for purpose,
>>> > my last hose lasted at least 5 years before starting to degrade so an
>>> > original hose should be fine until a proper replacement is found,
>>> >
>>> >
>>> >
>>> >
>>> > Read this topic online here:
>>> >
>>> > http://forums.matronics.com/viewtopic.php?p=476410#476410
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>>
>>>
>>>
>>>
>>>
>>> ---
>>> This email has been checked for viruses by AVG.
>>> http://www.avg.com
>>>
>>>
>>>
>>> ==================
>>> http://www.matronics.com/Navigator?Europa-; - MATRONICS WEB FORU
MS -
>>> http://forums.matro - NEW MATRONICS LIST WIKI -
>>> http://wiki.matronics.com
>>> http://www.matronics.com/contrib==============
========
|