The angle is nearer 60 degrees so I am not sure it would work. It would
be nice if it did.
Brian
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of David Watts
Sent: 16 December 2017 15:35
Subject: Re: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017
All Europas
I have seen an aluminium tube 45 degree solution on eBay at item number
300735817645 for less than =C2=A320. May be suitable.
Dave Watts
G-BXDY
On 16 Dec 2017, at 14:28, davidjoyce@doctors.org.uk wrote:
Dave, a nice solution, but for those who haven't got a tame aluminium
welder it might be cheaper to buy a flurosilicone lined angled fuel
filler hose from carbuildersolutions.com and use a straight section of
alloy tubing to make up the necessary length. Regards, David, G-XSDJ
On 2017-12-16 11:27, david park wrote:
<image1.jpeg>
Simple and cheap did this three years ago without any problem
Dave Park
On 16 Dec 2017, at 11:19, GRAHAM SINGLETON
<grahamsingleton@btinternet.com> wrote:
Best solution is to use short silicone joints to an aluminium elbow,
it's much lighter and the silicone is less problematic regarding erosion
etc.
Tim Ward organised a batch of nice elbows but that was years ago.
It wouldn't be difficult to weld one up?
Graham
On Saturday, 16 December 2017, 9:33, Brian Davies
<brian.davies44@gmail.com> wrote:
<brian.davies44@gmail.com>
Demon Tweeks says in stock 3 day delivery.
Brian
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Pete
Lawless
Sent: 15 December 2017 18:20
Subject: Re: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017
All Europas
Hi Ivor
Been looking for hose for a standard mod to replace the classic pipe
with aluminium. The only hose we have found so far that is guaranteed
100% for petrol is Samco ProFuel. Unfortunately it is on a 42 day lead
time.
https://www.merlinmotorsport.co.uk/p/samco-profuel-silicone-coupling-hose
-psch
Pete
G-RMAC Europa 109 Classic
On 15/12/17 17:53, Ivor wrote:
>
> Hi Duncan
>
> as previously said i managed to get a piece of the original hose from
> Frank Xuereb that will work fine until the next flying season when
> hopefully a more permanent solution is found, IMO if a hose designed
> for fuel cannot be immersed in fuel then it=C3=A2=82=AC=84=A2s
not fit for purpose,
> my last hose lasted at least 5 years before starting to degrade so an
> original hose should be fine until a proper replacement is found,
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=476410#476410
>
>
>
>
>
>
>
>
>
>
---
This email has been checked for viruses by AVG.
http://www.avg.com <http://www.avg.com/>
==================
http://www.matronics.com/Navigator?Europa-; - MATRONICS WEB
FORUMS -
http://forums.matro - NEW MATRONICS LIST WIKI -
http://wiki.matronics.com
http://www.matronics.com/contrib==============
========
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&;
utm_campaign=sig-email&utm_content=emailclient>
Virus-free.
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&;
utm_campaign=sig-email&utm_content=emailclient> www.avg.com
|