Hi Jon,
The standard lengths are 76mm so I have ordered two . You need about 30mm
overlap
on to each joint surface and there are effectively 4 joint surfaces.
Regards
Brian
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of JonSmith
Sent: 29 December 2017 11:48
Subject: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017 All Europas
--> <jonsmitheuropa@tiscali.co.uk>
Hi Brian, I am going to order the Profuel joint from Merlin as you described,
in anticipation of the standard mod. I bought one of Tims aluminium elbows
some
years ago but never got around to fitting it and its still in my garage!
Sorry for a silly question but do you think I need two of them (one for each
end)
or will one of them cut into two be sufficient?
Cheers!
brian.davies44@gmail.c wrote:
> As I explained in an earlier e-mail, there is no LAA Standard Mod to fit an
> aluminium elbow on an XS Europa. As nobody has applied for a standard Mod I
> have agreed with Andy Draper that I will do so. It will be based on Tim
> Ward's aluminium elbow and will use Samco Profuel joints. These can be
> purchased from www.merlinmotorsport.co.uk in a short length of 76mm for
> UK Pounds 11.24 plus VAT and postage. Currently there is a 39 day lead time
> on this item. Part number PSCH51-BLU
>
> I will give you a progress report after Christmas.
>
> Regards
>
> Brian Davies
>
> --
--------
G-TERN
Classic Mono
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=476852#476852
---
This email has been checked for viruses by AVG.
http://www.avg.com
|