Hi Tim,
As and when you get a batch of these metal elbows for Europa XS made up, could
you please include one for J Baranski (G-CCJX). John is a Europa Club member
in the UK, but has not as yet registered for the Matronics Forum so I am sending
this request on his behalf.
Pete Jeffers (Europa Club LAA Inspector)
PS he is currently AOG as he damaged his original whilst trying to inspect it.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Tim Ward
Sent: 02 January 2018 20:11
Subject: Re: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017 All
Europas
Thanks Brian.
Most appreciated.
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t@xtra.co.nz
Mob +64 210640221
> On 3/01/2018, at 6:46 AM, Brian Davies <brian.davies44@gmail.com> wrote:
>
> --> <brian.davies44@gmail.com>
>
> Update- a formal LAA Mod application for the XS aluminium elbow has now been
submitted and is "in the system".
>
> I will let you know when it has been approved.
>
> Regards
>
> Brian
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Brian
> Davies
> Sent: 29 December 2017 17:33
> To: europa-list@matronics.com
> Subject: RE: Europa-List: Re: LAA Airworthiness Alert. AIL December
> 2017 All Europas
>
> --> <brian.davies@clara.co.uk>
>
> Hi Jon,
>
> The standard lengths are 76mm so I have ordered two . You need about 30mm
> overlap
on to each joint surface and there are effectively 4 joint surfaces.
>
> Regards
>
> Brian
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of JonSmith
> Sent: 29 December 2017 11:48
> To: europa-list@matronics.com
> Subject: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017
> All Europas
>
> --> <jonsmitheuropa@tiscali.co.uk>
>
> Hi Brian, I am going to order the Profuel joint from Merlin as you described,
in anticipation of the standard mod. I bought one of Tims aluminium elbows
some years ago but never got around to fitting it and its still in my garage!
> Sorry for a silly question but do you think I need two of them (one for each
end) or will one of them cut into two be sufficient?
> Cheers!
>
>
> brian.davies44@gmail.c wrote:
>> As I explained in an earlier e-mail, there is no LAA Standard Mod to fit an
>> aluminium elbow on an XS Europa. As nobody has applied for a standard Mod I
>> have agreed with Andy Draper that I will do so. It will be based on Tim
>> Ward's aluminium elbow and will use Samco Profuel joints. These can be
>> purchased from www.merlinmotorsport.co.uk in a short length of 76mm for
>> UK Pounds 11.24 plus VAT and postage. Currently there is a 39 day lead time
>> on this item. Part number PSCH51-BLU
>>
>> I will give you a progress report after Christmas.
>>
>> Regards
>>
>> Brian Davies
>>
>> --
>
>
> --------
> G-TERN
> Classic Mono
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=476852#476852
>
>
>
>
>
>
>
>
>
>
> ---
> This email has been checked for viruses by AVG.
> http://www.avg.com
>
>
>
>
>
>
>
>
>
>
|