Hi Pete,
Sure thing, done.
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t@xtra.co.nz
Mob +64 210640221
> On 7/01/2018, at 2:39 AM, Peter Jeffers <pjeffers@talktalk.net> wrote:
>
>
> Hi Tim,
> As and when you get a batch of these metal elbows for Europa XS made up, could
you please include one for J Baranski (G-CCJX). John is a Europa Club member
in the UK, but has not as yet registered for the Matronics Forum so I am sending
this request on his behalf.
> Pete Jeffers (Europa Club LAA Inspector)
> PS he is currently AOG as he damaged his original whilst trying to inspect it.
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Tim Ward
> Sent: 02 January 2018 20:11
> To: europa-list@matronics.com
> Subject: Re: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017 All
Europas
>
>
> Thanks Brian.
> Most appreciated.
> Tim
>
> Tim Ward
> 12 Waiwetu Street,
> Fendalton,
> Christchurch, 8052
> New Zealand
>
> ward.t@xtra.co.nz
>
> Mob +64 210640221
>
>
>> On 3/01/2018, at 6:46 AM, Brian Davies <brian.davies44@gmail.com> wrote:
>>
>> --> <brian.davies44@gmail.com>
>>
>> Update- a formal LAA Mod application for the XS aluminium elbow has now been
submitted and is "in the system".
>>
>> I will let you know when it has been approved.
>>
>> Regards
>>
>> Brian
>>
>> -----Original Message-----
>> From: owner-europa-list-server@matronics.com
>> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Brian
>> Davies
>> Sent: 29 December 2017 17:33
>> To: europa-list@matronics.com
>> Subject: RE: Europa-List: Re: LAA Airworthiness Alert. AIL December
>> 2017 All Europas
>>
>> --> <brian.davies@clara.co.uk>
>>
>> Hi Jon,
>>
>> The standard lengths are 76mm so I have ordered two . You need about 30mm
>> overlap
on to each joint surface and there are effectively 4 joint surfaces.
>>
>> Regards
>>
>> Brian
>>
>> -----Original Message-----
>> From: owner-europa-list-server@matronics.com
>> [mailto:owner-europa-list-server@matronics.com] On Behalf Of JonSmith
>> Sent: 29 December 2017 11:48
>> To: europa-list@matronics.com
>> Subject: Europa-List: Re: LAA Airworthiness Alert. AIL December 2017
>> All Europas
>>
>> --> <jonsmitheuropa@tiscali.co.uk>
>>
>> Hi Brian, I am going to order the Profuel joint from Merlin as you
>> described,
in anticipation of the standard mod. I bought one of Tims aluminium elbows
some years ago but never got around to fitting it and its still in my garage!
>> Sorry for a silly question but do you think I need two of them (one for each
end) or will one of them cut into two be sufficient?
>> Cheers!
>>
>>
>> brian.davies44@gmail.c wrote:
>>> As I explained in an earlier e-mail, there is no LAA Standard Mod to fit an
>>> aluminium elbow on an XS Europa. As nobody has applied for a standard Mod I
>>> have agreed with Andy Draper that I will do so. It will be based on Tim
>>> Ward's aluminium elbow and will use Samco Profuel joints. These can be
>>> purchased from www.merlinmotorsport.co.uk in a short length of 76mm for
>>> UK Pounds 11.24 plus VAT and postage. Currently there is a 39 day lead
>>> time on this item. Part number PSCH51-BLU
>>>
>>> I will give you a progress report after Christmas.
>>>
>>> Regards
>>>
>>> Brian Davies
>>>
>>> --
>>
>>
>> --------
>> G-TERN
>> Classic Mono
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=476852#476852
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> ---
>> This email has been checked for viruses by AVG.
>> http://www.avg.com
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
>
>
|