hoops?
Graeme,
I use Pro Fuel filters under pilot and passenger seats, feeding to a 3 way Fuel
cock, (Main-Res-OFF) then feeding to an Andair gascolator, electric fuel pump
to the engine driven mechanical pump and finally engine.
Cheers,
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t@xtra.co.nz
Mob +64 210640221
> On 7/03/2018, at 5:22 AM, David Watts <dg.watts@talktalk.net> wrote:
>
>
> Graeme
>
> I'm personally involved with 3 other Europas besides my own and between us we
use the standard Pro Fuel filters or gascolators.
> As for carb heating, we all use the Skydrive carb heat kit which uses the
> water
system.
>
> Dave Watts
> G-BXDY Classic Mono
>
>> On 6 Mar 2018, at 4:05 pm, graeme bird <graeme@gdbmk.co.uk> wrote:
>>
>>
>> Do all you guys have normal standard fuel filters? Are they .1 mm ? Can't
>> find
a spec. And what about carb heating - water based? Added complexity and risk
of leaks in my view?
>> Carbs should be warmed from air flow out of the side top cowl vents and from
sitting over the exhaust pipes ( mine have shielded bowls).
>>
>> --------
>> Graeme Bird
>> G-UMPY - Mono Classic/XS FFW 912S, Woodcomp 3000/3W CS, trutrak Gemini 2
>> axis
AP, PAW, PFLARM core, ads-b out, 8.33khz, mode S, FP-5, Aera500, SD on Nexus,
SmartA3
>> 325 hours & 6 years on the Mono, 930 total
>> g@gdbmk.co.uk
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=478420#478420
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
|