hoops?
Graeme,
Also have the Skydrive Water jacket around the Carb intake for icing, brilliant.
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t@xtra.co.nz
Mob +64 210640221
> On 7/03/2018, at 7:02 AM, Tim Ward <ward.t@xtra.co.nz> wrote:
>
>
> Graeme,
> I use Pro Fuel filters under pilot and passenger seats, feeding to a 3 way
> Fuel
cock, (Main-Res-OFF) then feeding to an Andair gascolator, electric fuel pump
to the engine driven mechanical pump and finally engine.
> Cheers,
> Tim
>
> Tim Ward
> 12 Waiwetu Street,
> Fendalton,
> Christchurch, 8052
> New Zealand
>
> ward.t@xtra.co.nz
>
> Mob +64 210640221
>
>
>> On 7/03/2018, at 5:22 AM, David Watts <dg.watts@talktalk.net> wrote:
>>
>>
>> Graeme
>>
>> I'm personally involved with 3 other Europas besides my own and between us we
use the standard Pro Fuel filters or gascolators.
>> As for carb heating, we all use the Skydrive carb heat kit which uses the
>> water
system.
>>
>> Dave Watts
>> G-BXDY Classic Mono
>>
>>> On 6 Mar 2018, at 4:05 pm, graeme bird <graeme@gdbmk.co.uk> wrote:
>>>
>>>
>>> Do all you guys have normal standard fuel filters? Are they .1 mm ? Can't
>>> find
a spec. And what about carb heating - water based? Added complexity and risk
of leaks in my view?
>>> Carbs should be warmed from air flow out of the side top cowl vents and from
sitting over the exhaust pipes ( mine have shielded bowls).
>>>
>>> --------
>>> Graeme Bird
>>> G-UMPY - Mono Classic/XS FFW 912S, Woodcomp 3000/3W CS, trutrak Gemini 2
>>> axis
AP, PAW, PFLARM core, ads-b out, 8.33khz, mode S, FP-5, Aera500, SD on Nexus,
SmartA3
>>> 325 hours & 6 years on the Mono, 930 total
>>> g@gdbmk.co.uk
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=478420#478420
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>
>
>
>
>
|