Re: Europa-List: Re: throttle pivot sifffnut won't stay in place

[Kingsley Hurst <kingsnjan@westnet.com.au>]

Chris

You said ..... =9CI tried to find a width in the classic manual since t
hey do tell you to make it but lo and behold no width!=9D

The width of the throttle lever housing as per the Classic Manual is 40 mm (
1.5=9D)

I just checked my Manual and like you I couldn=99t find the width eith
er. Knowing I had made mine from the manual instructions, I re-read them.   T
he figure is not dimensioned on the drawing but in bold printing across the f
ace of the drawing it says ......
Foam Former
Make 40mm (1.5=9D) Thick

Hope this helps. 

Kingsley in Oz