When I had a airbox on initial build I bonded alloy tupe in to exits to
strengthen
them.
Dave Park
> On 3 Sep 2020, at 15:37, Jeff B <topglock@cox.net> wrote:
>
>
> Steve, you should be fine as long as the internal diameter of the tube is
> equal
to or greater than the internal diameter of the carb opening.
>
> Jeff
>
> "I believe that forgiving them is God's function. Our job is to arrange the
> meeting."
>
> -Gen. Norman Schwarzkopf
>
>> On 9/3/2020 8:40 AM, Steven Pitt wrote:
>> I have had to repair my airbox as it split under the clamp.
>> Can anyone tell me how critical the airflow into the carburettors via the box
is? Do I need to ensure a smooth and equal airflow?
>> I suspect not as the quality of the airbox is somewhat rudimentary.
>> For information I made up some bid' tube and epoxied it into the existing
>> airflow
tube. I have tried to make the entrance a smooth as possible.
>> Thank you.
>> Steve Pitt
>> G-SMDH
>
>
>
|