Hello Bud, I have problems with my original Ducati regulator, in 2013 I
replaced it with the Silent hektik Regulator. It fulfilled its function and
after 5 years, alarms flash on my Dynon D100 + D120.
After checking, it appears that the Silent hektik regulator is out of
order? ... After various searches, I found the MOSFET regulator FH020AA. I
installed it on my 912S the alarms went off and all is well.
I am attaching the document for this regulator to you.
Michel AUVRAY
Europa 098, 145, CTSW
Le mar. 11 mai 2021 =C3- 04:02, budyerly@msn.com <budyerly@msn.com> a =C3
=A9crit :
>
> Will,
> Yes it can.
> Simply turn off your alternator switch if connected to the C and see if
> the noise stops.
>
> If you are wired differently where the regulator is powered continuously
> and only the bus is disconnected by the alternator switch, pull the C out
> of the regulator or just unplug the whole regulator and check.
>
> If the noise stops. You are out $170 bucks for a new one.
>
> Bud
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=501851#501851
>
>
===========
===========
===========
===========
===========
>
>
|