Thanks bud
I will also try that if it comes back. I will unplug the whole thing as
my alt switch is down stream of the vr.
So having done a bit of interweb research lightspeed suggested turning down
the headset volume on the headset volume control if it has one (as opposed
the the control on the radio) and turning down the mic gain. This appears
to have cured the problem.
How permanent this will remains to be seen.
Will
William Daniell
+1 786 878 0246
On Mon, May 10, 2021, 21:02 budyerly@msn.com <budyerly@msn.com> wrote:
>
> Will,
> Yes it can.
> Simply turn off your alternator switch if connected to the C and see if
> the noise stops.
>
> If you are wired differently where the regulator is powered continuously
> and only the bus is disconnected by the alternator switch, pull the C out
> of the regulator or just unplug the whole regulator and check.
>
> If the noise stops. You are out $170 bucks for a new one.
>
> Bud
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=501851#501851
>
>
|