I=99m asking if you did it by accident, I know what happens=F0=9F=98
Alan
Sent from my iPad
> On 7 Jun 2021, at 10:11, david park <dpark748@me.com> wrote:
>
> =EF=BBAllan have you put ANODE to switch contact?
>
> Dave Park
>
>
>>> On 7 Jun 2021, at 09:35, Alan Burrill <alanb@dpy01.co.uk> wrote:
>>>
>> =EF=BBAre you sure the diode is not faulty?
>>
>> You can check it with an meter set to read resistance. Should be high res
istance one way and low the other.
>>
>> Have you tried connecting it the other way round?
>>
>> Alan
>>
>> Sent from my iPad
>>
>>>> On 7 Jun 2021, at 09:02, david park <dpark748@me.com> wrote:
>>>>
>>> =EF=BBBud,
>>> Still confused as Europa Manual wiring diagram shows Anode to Earth? Not
switch.
>>> Regards
>>> Dave Park
>>>
>>>
>>>>> On 7 Jun 2021, at 01:06, Bud Yerly <budyerly@msn.com> wrote:
>>>>>
>>>> =EF=BB
>>>> Dave,
>>>> I didn't see anyone commented on your diode.
>>>>
>>>> Pretty much any diode will do. If you get it backwards, the saving gra
ce is the start solenoid is looking for 12 volts. Of course, the solenoid m
ust be grounded.
>>>> Most mistakes are the ground is left off the solenoid when putting on t
he diode. Another problem is guys don=99t insulate the anode side of t
he diode and it shorts.
>>>>
>>>> The Rotax manual doesn't comment on the diode. But it is an accepted p
ractice to extend the life of the contacts in the starter solenoid. The Eur
opa Electrical Chapter 25 advises to use an IN5404 but any will do.
>>>>
>>>> IN5404
>>>> <image001.png>
>>>>
>>>> silicone diode is shown above. Anode or plus side is on the starter sw
itch tab and the cathode or negative goes to the ground bolt holding on the s
tarter solenoid. I use at least a #18 or 16 wire from the solenoid fastenin
g bolt to the main firewall ground.
>>>>
>>>> Best Regards,
>>>> Bud Yerly
>>>>
>>>> -----Original Message-----
>>>> From: owner-europa-list-server@matronics.com <owner-europa-list-server@
matronics.com> On Behalf Of david park
>>>> Sent: Wednesday, June 02, 2021 2:44 PM
>>>> To: europa-list@matronics.com
>>>> Subject: Europa-List: Starter Diode
>>>>
>>>>
>>>> I fitted a starter Diode and engine would not start. Orientation was as
described with band end cathode on starter terminal and other end to earth?
>>>> Have I got wrong diode.
>>>> Any advice appreciated
>>>>
>>>> Dave Park G-LDVO
>>>>
>>>>
>>>> - The Europa-List Email Forum -
>>>> --> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%
2Fwww.matronics.com%2FNavigator%3FEuropa-List&data=04%7C01%7C%7C4756a1
89af0d42b6175508d925f6f1c0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6375
82564812620700%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL
CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=d2yFiqBfE8TCD9qLmlbZwUHkZby
9t6u3YMcNESeUVsc%3D&reserved=0
>>>> - MATRONICS WEB FORUMS -
>>>> --> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%
2Fforums.matronics.com%2F&data=04%7C01%7C%7C4756a189af0d42b6175508d925
f6f1c0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582564812630692%7CUnk
nown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXV
CI6Mn0%3D%7C1000&sdata=SBC%2BHeUkzr3LiivK88gfvqg0yBuA5ly76yuWCWUUhMM%3
D&reserved=0
>>>> - NEW MATRONICS LIST WIKI -
>>>> --> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%
2Fwiki.matronics.com%2F&data=04%7C01%7C%7C4756a189af0d42b6175508d925f6
f1c0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582564812630692%7CUnkno
wn%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI
6Mn0%3D%7C1000&sdata=o8qJjaCYZwDfnYZL5ZTUYwVjcHuo0CD7LEX42XsDfhY%3D&am
p;reserved=0
>>>> - List Contribution Web Site -
>>>> -Matt Dralle, List Admin.
>>>> --> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%
2Fwww.matronics.com%2Fcontribution&data=04%7C01%7C%7C4756a189af0d42b61
75508d925f6f1c0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582564812630
692%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1h
aWwiLCJXVCI6Mn0%3D%7C1000&sdata=%2F4PsRd1psVqvnaU7%2FNqFY9pTbwXM%2FA4X
O38X5pjT4sc%3D&reserved=0
>>>>
>>>>
>>>>
|